 | Eccosorb 5G Hi F15G absorber High Frequency Range It is flexible with a high service temperature (165C). It has a UL94 fire retardancy rating. The material is effective in reducing specular reflections as well as suppressing cavity resonances especially above 40 ghz and surface currents Show More |
 | Eccosorb 5G MeF 15G absorber Medium Frequency Range It is very flexible and has a high service temperature (165°C). It is recommended for all mmWave applications in the 18-40 GHz. It has a UL94 V-0 rating. Show More |
 | Eccosorb FGMBroadband free space elastomer absorber Eccosorb FGM is available in two thicknesses (FGM-40 at 0.040"" and FGM-125 at 0.125"") with different performance pending on targeted frequency band. The thinner FGM-40 will easily conform to contoured surfaces and both FGM-40 and FGM-125 can be bonded to metallic or non-metallic structures. Based on silicone, Eccosorb FGM is completely impervious to moisture and can be subjected to outdoor environments and high altitudes including space with no adverse effects. It can be easily cut with a knife or die and can be held in place with an optional Pressure Sensitive Adhesive (PSA). ECCOSORB FGM is used to line cavities in which antennas operate. These may be aircraft nacelles or caps to isolate radiation for test purposes. It may be applied to surfaces to improve radar performance, reduce radar cross section or backscattering. Show More |
 | Eccosorb JCSElectrically conductive mm wave absorber sheet Eccosorb JCS is waterproof and has excellent thermal characteristics, tolerating high and low temperatures. Eccosorb JCS is a pure dielectric absorber with no magnetic properties (permeability = 1). Eccosorb JCS is used to lower cavity Qs in RF amplifiers, oscillators, cabinets containing microwave devices, computer housings, LNBs, and isolation of antennas by insertion loss. It is also used to reduce surface currents on radiating elements and outer ground-plane type surfaces. Show More |
 | Eccosorb SFFree space narrow band elastomer These silicone rubber sheets are designed to be bonded to flat or curved metallic surfaces to reduce the reflectivity in a narrow band of frequencies. Eccosorb SF reflects -20 dB or less of normally incident microwave energy at the design frequency in the range of 1 to 26 GHz. Show More |
 | Eccosorb MMIHarsh environment mm wave absorber sheet Due to the chemical nature of the dielectric filler system, no oxidation is possible. As such, the product resists outdoor conditions very well. Show More |
 | Eccosorb BSRHigh loss flexible sub 18 Ghz absorber sheet It has low outgassing properties and high temperature resistance. BSR / MFS is flexible and can be fitted to compound curves. It is available in 2 versions BSR-1 and BSR-2. Show More |
 | Eccosorb MCSHigh loss UL rated sub 6 Ghz absorber sheet The material is impervious to moisture and can be subjected to high altitudes with no adverse effects. Being a silicone based absorber, it has low out-gassing properties for space or optical applications. When placed within a cavity, Eccosorb MCS has proven to be very effective at dampening resonances due to the absorbers high permittivity and permeability as well as high loss values, which in turn reduces the overall VSWR. It is designed for the suppression of surface currents over a wide range of frequencies but is also useful in reducing RF coupling of antennas and microwave components Show More |
 | Eccosorb GDSMedium frequency UL rated cavity resonance absorber It is designed for the frequency range from 18Ghz. The material is impervious to moisture and can be subjected to high altitudes, with no adverse effects. Being a silicone based absorber, it has low outgassing properties for space or optical applications. Show More |
 | NoiseSorb NS1000Ultra thin high permeability noise suppressor It is used to mitigate EM energy; it interacts and suppresses the magnetic field at the noise source. Various thicknesses are available compliant with compact design No need for specific design, just cut and bond a piece of thin absorber onto the noise source. NoiseSorb NS1000 series absorber can be placed over CPUs, main chip sets and other memory and power IC devices as well as flat cables to suppress radiated noise causing interference with RF functions, crosstalk or SAR emissions Show More |
