 | Eccostock PPFlexible closed cell dielectric foam Due to the low dielectric constant, the materials are essentially transparent to electromagnetic energy. It offers excellent thermal insulation. Eccostock PP is lightweight and will return to its normal thickness after being compressed. It can be heat sealed to form blocks of material or to make contoured pieces that can be draped over complex objects. Eccostock PP can be used as radomes, blankets, and coverings where radar transparency is desired as well as spacer in electronic. Show More |
 | Eccostock FlexKFlexible dielectric elastomer It weighs only about half that of polystyrene and one quarter that of polytetrafluoroethylene. FlexK LoK is waterproof and has excellent thermal characteristics, tolerating high and low temperatures. Material does not flake or shed. It s used in a variety of application from thin dielectric spacer in PCB to radome. Show More |
 | Eccostock HIK 500High temperature tuned low loss dielectric stock When subjected to high temperatures, the surface will darken. This however has no adverse effect. Eccostock HiK500F offers low moisture absorption and low outgassing properties for space applications. It is used in cavity tuning probes, patch antennas, and dielectric support pieces as well as waveguide Show More |
 | Eccostock LoKLight weight dielectric thermoset Eccostock LOK weighs only about half that of polystyrene and one quarter that of polytetrafluorethylene, making it first choice for weight sensitive application. It has better dimensional stability than other low loss plastics and exhibit very good moisture resistance It will not cold flow, nor will flow when heat is applied. Eccostock Lok is of benefit in application like coaxial, waveguide and antenna support to minimize reflections in transmission line thanks to its low dielectric constant. Show More |
 | Eccostock 0005Low outgassing thermosetting low loss dielectric Eccostock 0005 is showing good machinability and can easily be bonded to other material. It s a good choice for custom microwave/coaxial transmission line components (spacer in Type N connectors, waveguide supports, antenna insulators, microwave lenses... Eccostock 0005 is able to withstand high voltages for producing gap switch houses, capacitors and other components and show high radiation resistance with little change in dielectric loss with exposures up to 1000m rads. Show More |
 | Eccostock FFPOne part cure in place low loss dielectric ECCOSTOCK FFP is designed to infiltrate densely populated electronic packages, readily filling void space around components when vibrated in place. It can be used to stabilize crystal oscillators as well as other delicate components that need to be held in place or thermally and vibration protected. Show More |
 | Eccostock SHRigid closed cell dielectric foam Unlike most polyurethanes, Eccostock SH has an extremely low dissipation factor and low dielectric constant. It is primarily used as a high temperature structural member or thermal barrier in electrical/electronic applications. Show More |
 | Eccostock HIKTuned low loss dielectric stock Low outgassing properties make them suitable for space applications. It exhibits a very low water absorption (<0.1) making it of choice for outdoor applications. It is used in cavity tuning probes, patch antennas, and dielectric support pieces as well as waveguide. Show More |
